Round pools

Round pools are the cheapest way to have an own pool. They can be installed above ground (at a depth 120cm), partially in-ground or in-ground (at a depth 150cm).

The metal construction is 0,6mm thick and at a depth 150cm is 0,8mm, hot galvanized, with additional polyester layer inside and outside.

Galvanizing method is used wherever the good corrosion protection and long life are essential. This is the most effective method of protecting metals  against corrosion. Hot galvanizing process is interaction between the molten zinc and metal substrate. The molten zinc penetrate into the crystal lattice of the metal and forms a multitude of zinc layers. The rest of the coatings – electrolyte, varnish, plastic etc. aren’t able to ensure such a good protection against corrosion. That is why these coatings are rather decorative than anticorrosive.

If you will install the pool in-ground you need to cast a concrete bottom 10-15cm thick. After installed, around the pool should be done backfill with a drier concrete (10cm thick).

Advantages:

• lower prices
• at a depth of 120cm can be installed above-ground
• by dimensions of 500cm you can swim in a circle
• there are no corners and that is why can be cleaned very easily
• the metal construction and the liner have 10 years guarantee

Warning: If you decide to install a coping stone around the in-ground pool we recommend you to use a special upper handrail. This handrail will help you to change the liner without broking the coping stone.

All the pools we offer have such a handrail.

The price of the pools listed below include: prefabricated steel construction, PVC membrane and strips for the fixing of the construction.

For the properly working of the pool, you need to add more: filter system, skimmer, inlet nozzles, main drain and ladder.

If you want to calculate the total price of the pool, please visit our pool calculator.